DT-315P
$1,265.00 – $1,365.00
NEMA 4X Stroboscope for Harsh Usage
The DT-315P is a rugged, sealed NEMA 4X (IP65) Stroboscope suitable for working in areas without AC power.
Description
The DT-315P Battery Powered, NEMA 4X Stroboscope for Harsh Applications. The DT-315P is a rugged, sealed NEMA 4X (IP65) Stroboscope suitable for working in areas without AC power. The DT-315P works just like the DT-315A battery operated strobe. Equipped with Phase shifting in angle of delay (0-359 degrees) and flash time delay, (0-300 mSEC) the DT-315P is engineered for checking timing and wear on rotating and reciprocating machinery. With its rugged, metal body and NiCd rechargeable battery, the DT-315P provides the maintenance and quality professional a rugged, accurate strobetach for inspection on presses, conveyers, gear reducers, chain drives, fuel injectors, paint spray patterns, and many other harsh environment, industrial applications.
Supplied with 115V AC Battery Charger.
Features
- Extruded aluminum, NEMA 4X construction: Extraordinary durability yields long service life
- Internal battery supply: Lightweight; enables easy portability
- Repeatable accuracy (± 0.01% of reading): Fully meets the strictest tolerances
- Phase shift (in degrees of delay time): Enables visual analysis of rotating/reciprocating objects through all points of motion/time/angle
- Flash timer control: Prolongs flash tube life
- Manual flash controller knob: Permits easy/accurate adjustments to flash rate
- Continuous duty cycle: Eliminates downtime waiting for unit to cool
- Highly polished focused reflector: Prevents “blind” viewing areas
Specifications
| Display | RPM, Synchronous mode: 60.0 ~ 3000FPMDelay Angle, Delay mode: 0 ~ 359° or 0 ~ 300mS conversion display |
| Flashtube | Xenon lamp TFU-100B-A32 |
| Flashtube Power | Max. 10W |
| Flashing Time | Approx. 30 µ sec |
| Power | Battery: Nicd battery, 8KR – 2000 sce SANYO, Operating time: Approx. 1 hour (full charge at 3000 FPM); Battery Charge Time: Approx. 10 hours Do not operate over 10 hours continuouslyExternal power: Disconnect the built-in battery before operating instrument by external power)DC9 14.5V, Max. 24W (current consumption is 24W/input voltage) or operate by provided adapter; AC115V 10%, 50/60 Hz Max. 40VA |
| Operating Temperature | 32 to 104 ° F (0 to 40 °C) |
| Power Requirement | Power Plug & Cable for Recharging Battery Included |
| Dimensions | 5.11″ W x 6.22″ H x 10.20″ L (130 W x 158 H x 259 L mm) |
| Weight | 4.6 lbs (2.1 kg) |
| Warranty | 2 Years |
| Included Accessories | Input/Output signal plug, rechargeable battery with AC adapter, protective case |
| Internal Mode | undefined |
| Flashing Range | 60.0 ~ 3,000 FPM |
| Display Accuracy | Synchronous mode: ± 0.01% plus ± 1 digitDelay mode:+ 0 -0.2mS plus ± 1 digit |
| Drift | ± 0.01 (at 0 ~ 40 °C) |
| Phase Shift | Use +/- push buttons (360° in 6 seconds) |
| Display Update Time | 0.2 sec approx |
| Output Signal | Approx. 12V |
| Other Functions | ÷2. x2 Flashings, Phase shift adjustment |
| External Mode | undefined |
| Flashings | Synchronous Mode: 60.0 ~ 3,000FPMDelay mode: 200 ~ 3,000 FPM |
| Delay Angle Setting Range | Delay Mode: 0 ~ 359°, Set by 1° |
| Update Time | 1 per second |
| Input Signal | H Level:2.5 ~ 12V L level:0 ~ 0.4V 50 μs or over for H.L. level Trigger at rising edge Approx. 10Ω impedance |
| Sensor Power | Battery:6.8 ~ 11.0V Adapter:10.2 ~ 12.2V DC:9 ~ 14.5V : 7.8 ~ 14.1V Max. 40mA (including max 0.6V Ripple) |
| Setter | Flashing, Delay angle: Jog Shuttle Mode, Display Unit: Tact Switch |
Additional information
| Model | BAT-DT315AP-ASSY, DT-315A-BC, DT-315P, DT-315P-230V, FLASHTUBE311-J, SAS-DT300 |
|---|
