MP-10
$125.00
Magnetic Pick-Up Sensor
MP-10 Magnetic Pick-Up Sensor provides a sine wave output whenever there is an abrupt change from non-magnetic to magnetic material moving past the sensor pole.
Description
Model MP-10 pickup provides a sine wave output whenever there is an abrupt change from non-magnetic to magnetic material moving past the sensor pole. The output volate is directly proportional to the change in magnetic flux intensity over the change in time.
Mounting
Unit will mount in a 5/8″ threaded hole and is provided with 2 jam nuts to secure the sensor.
Adjustment
Pickup should be adjusted for a typical clearance of .01″ between sensor and gear. This adjustment will provide excellent sensitivity and resolution.
Temperature Range
-40 to 221 °F
Connections
| Lead Wire | Shield | White | Black |
|---|---|---|---|
| Tachometer Terminal |
E | SIG | OV |
Bare: Sensor cable shield
White: Signal output lead
Black: Sensor common
Features
- Sine wave output from change in magnetic to non-magnetic
- Change in voltage proportional to magnetic flux intensity over time
- Range of 0.01″ (0.25 mm) typical clearance
- 10′ (3 m) cable
Speed vs. Voltage
Specifications
| Mounting | 5/8″ thread hole |
| Adjustment | Typical clearance of 0.1″ between sensor and gear |
| Temperature | -40 to 221 °F |
| Connections: Lead wire | ShieldWhiteBlack |
| Tachometer: Terminal | ESIGOV |
Additional information
| Model | MP-10 |
|---|