DT-5TXR
Panel Mount Tachometer
The DT-5TXR panel meter with optional output Modules is an economical unit for speed and process time monitoring when combined with a compatible in-line sensor.
Description
The DT-5TXR panel meter with optional output Modules is an economical unit for speed and process time monitoring when combined with a compatible in-line sensor. Loaded with features found in more expensive units, the DT-5TXR Panel Meter is extremely versatile with selectable inputs. The DT-5TXR is fully scalable and possesses three selectable modes allowing it to measure RPM/linear speed/rate, elapsed time and process time. Each panel meter accepts a variety of signal inputs from any sensor providing an NPN, contact, sine wave, or square wave such as pulse generators, proximity sensors, photoelectric sensors, magnetic sensors and NPN OC transistors. Typical applications can range from machining operation timing, rate of change monitoring such as on a conveyor, elapsed time of oven curing etc. with any variety of compatible sensor inputs desired. The DT-5TXR panel meter also accepts various output modules, enabling it to output data for analysis, record keeping or assist in controlling the process through a separate control device. Up to two modules can be accepted simultaneously, offering an enormous number of combinations and options.
Features
- Large 6 digit LED display plus two smaller 6 digit secondary displays allow easy viewing from greater distances
- Highly accurate (± 0.008% ± 1 digit) makes ideal for process control and analysis
- Selectable update time allows operator to speed up/slow down display changes to facilitate process
- Selectable decimal point enables higher resolution display potential 1/8 DIN size panel cut out permits easy, industry-standard mounting
- Great versatility with multiple sensor input capability in one unit: NPN open collector, contact and square or sine wave sensor inputs
- Accepts up to two output modules allowing voltage, current, BCD, NPN & relay output combinations for control or remote process monitoring
- IP66 front cover protection keeps water out, enables usage in compatible plant wash-down operations
- Wide power range (85 – 264VAC, 50/60Hz) eliminates need for having to purchase and wire an additional power transformer. Low voltage models available
- Scalable programming gives user the flexibility to set up and monitor virtually any process
- DC power source output to power compatible sensors saves money by eliminating need for separate power supply
- Front cover protection eliminates accidental bumping of keypad to incorrect program
Plug-In Modules
| Module | Description |
|---|---|
| DOP-BCD | BCD output module, 36 Pin Connection |
| DOP-CPTR | Relay output module, terminal block connection |
| DOP-FVC | Analog output module (4-20mA & 0-1, 0-10, 1-5 VDC), 36-pin connection |
| DOP-FVTR | Analog output module (4-20mA & 0-1, 0-10, 1-5 VDC), terminal block connection |
| DOP-RMTR | Ratio input module, terminal block connection |
| DOP-TRC | NPN open collector output module, 36 pin connection |
| DOP-TRTR | NPN open collector output module, terminal block connection |
Display
| Designation | Function | |
|---|---|---|
| 1 | Memory Button | Activates memory function |
| 2 | Memory Indicator | ON when memory function is activated |
| 3 | Teaching Button | Quick scaling setup mode |
| 4 | Teaching Indicator | ON when in quick scaling setup mode |
| 5 | Parameter Button | For parameter setup |
| 6 | Function Button | For function setup |
| 7 | Set Button | Sets parameter’s functions |
| 8 | Mode Button | Mode selection |
| 9 | Unit Decal | Area for decal |
| 10 | Primary Display | Displays units of measurement |
| 11 | Secondary Display B | Secondary display |
| 12 | Backspace Button | Backspace for corrections |
| 13 | Negative Sign/Decimal Point Button | Negative sign setting/decimal point shift |
| 14 | Numeric Button | For various functions |
| 15 | Secondary Display A | Secondary display |
| 16 | Signal Indicator | Blinking when signal is present |
| 17 | Comparator Indicator | Indicates comparator condition |
Specifications
| Measuring Range | 10 – 99,999 rpm (at 1 p/r)0.2 – 30,000 rpm (at 60 p/r) |
| Display Range | Tachometer/Rate Meter: 0 – 999999 with selectable decimal pointElapsed Time: 0:00:00 – 9:59:59 or 0.00 – 999.99 sec.Process Time: 0:00:00 – 0:59:59 or 0.00 – 999.99 sec. |
| Scalable | Yes (with outputs, see modules) |
| Accuracy | Tachometer/Rate Meter & Elapsed Time: ± 0.008 % ± 1 digitProcess Time: ± 0.008 % ± 1 digit |
| Display Update Time | 0.2, 0.5, 1, 2, 5, 10, 15, 30, 60 sec. |
| Input No. of P/R | 1 to 9,999 (programmable) |
| Input Signal Characteristics | NPN open collector input: max. frequency 100 kHz / Contact input: max. frequency 20 Hz / Square wave input: max. frequency 30 kHz – Sine wave input (magnetic pickup): max. frequency 10 kHz |
| Sensor Power Supply | 12 VDC (150 mA) |
| Power Requirement | 85 – 264 VAC (50/60 Hz) Optional (9 – 35 VDC at 1 W also available) |
| Ambient Temperature | 32° – 113° F (0 – 45° C) |
| Dimensions | 5.27″ x 3.78″ x 1.89″ (134 x 96 x 48 mm) |
| Product Weight | 0.66 lb (300 g) |
| Package Weight | 0.95 lb (430 g) |
| Warranty | 2 Years |
| Included Accessories | Mounting adapters & screws, decal sheet |
Additional information
| Model | DOP-BCDR, DOP-CPTR, DOP-FVC, DOP-FVTR, DOP-RMTR, DOP-TRC, DOP-TRTR, DT-5TXR, DT-5TXR-DC |
|---|
